Eizo Nanao Computer Monitor CG211 User Manual

This manual uses the safety symbols below. They denote critical information. Please read them  
carefully.  
WARNING  
Failure to abide by the information in a WARNING may result in serious  
injury and can be life threatening.  
CAUTION  
Failure to abide by the information in a CAUTION may result in moderate  
injury and/or property or product damage.  
Indicates a prohibited action.  
Indicates to ground for safety.  
Copyright© 2006 EIZO NANAO CORPORATION All rights reserved.  
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any  
form or by any means, electronic, mechanical, or otherwise, without the prior written  
permission of EIZO NANAO CORPORATION.  
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or  
information confidential unless prior arrangements are made pursuant to EIZO NANAO  
CORPORATION's receipt of said information Although every effort has been made to ensure  
that this manual provides up-to-date information, please note that EIZO monitor specifications  
are subject to change without notice.  
ENERGY STAR is a U.S. registered mark.  
Apple, Macintosh, Power Macintosh and Power Mac are registered trademarks of Apple  
Computer, Inc.  
VGA is a registered trademark of International Business Machines Corporation.  
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards  
Association.  
Windows is a registered trademark of Microsoft Corporation.  
 
PowerManager is a trademark of EIZO NANAO CORPORATION.  
ScreenManager, ColorEdge and EIZO are registered trademarks of EIZO NANAO  
CORPORATION in Japan and other countries.  
As an ENERGY STAR® Partner, EIZO NANAO CORPORATION has  
determined that this product meets the ENERGY STAR guidelines for  
energy efficiency.  
Product specifications may vary depending on the region. Confirm the specifications in the  
manual written in the language of the region of purchase.  
IMPORTANT!  
This product has been adjusted specifically for use in the region to which it  
was originally shipped. If operated outside the region to which it was originally  
shipped, the product may not perform as stated in the specifications.  
To ensure personal safety and proper maintenance, please read this section and  
the caution statements on the unit (refer to the figure below).  
[Location of the Caution Statements]  
If the unit begins to emit smoke, smells like something is burning, or  
makes strange noises, disconnect all power connections immediately  
and contact your dealer for advice.  
Attempting to use a malfunctioning unit may result in fire, electric shock,  
or equipment damage.  
Do not open the cabinet or modify the unit.  
Opening the cabinet or modifying the unit may result in fire, electric shock,  
or burn.  
 
Refer all servicing to qualified service personnel.  
Do not attempt to service this product yourself as opening or removing  
covers may result in fire, electric shock, or equipment damage.  
Keep small objects or liquids away from the unit.  
Small objects accidentally falling through the ventilation slots into the  
cabinet or spillage into the cabinet may result in fire, electric shock, or  
equipment damage.  
If an object or liquid falls/spills into the cabinet, unplug the unit  
immediately. Have the unit checked by a qualified service engineer before  
using it again.  
Place the unit at the strong and stable place.  
A unit placed on an inadequate surface may fall and result in injury or  
equipment damage.  
If the unit falls, disconnect the power immediately and ask your dealer for  
advice. Do not continue using a damaged unit. Using a damaged unit may  
result in fire or electric shock.  
Set the unit in an appropriate location.  
Not doing so may result in fire, electric shock, or equipment damage.  
Do not place outdoors.  
Do not place in the transportation system (ship, aircraft, trains,  
automobiles, etc.)  
Do not place in a dusty or humid environment.  
Do not place in a location where the steam comes directly on the  
screen.  
Do not place near heat generating devices or a humidifier.  
To avoid danger of suffocation, keep the plastic packing bags away  
from babies and children.  
Use the enclosed power cord and connect to the standard power outlet  
of your country.  
Be sure to remain within the rated voltage of the power cord.  
Not doing so may result in fire or electric shock.  
Power supply: 100-120/200-240 VAC±10 %, 50/60 Hz  
To disconnect the power cord, grasp the plug firmly and pull.  
Tugging on the cord may damage and result in fire or electric shock.  
The equipment must be connected to a grounded main outlet.  
Not doing so may result in fire or electric shock.  
Use the correct voltage.  
* The unit is designed for use with a specific voltage only. Connection to  
another voltage than specified in this User's Manual may cause fire, electric  
shock, or equipment damage.  
* Do not overload your power circuit, as this may result in fire or electric  
shock.  
Handle the power cord with care.  
* Do not place the cord underneath the unit or other heavy objects.  
* Do not pull on or tie the cord.  
If the power cord becomes damaged, stop using it. Use of a damaged cord  
may result in fire or electric shock.  
Never touch the plug and power cord if it begins to thunder.  
Touching them may result in electric shock.  
When attaching an arm stand, please refer to the user’s manual of the  
arm stand and install the unit securely.  
Not doing so may cause the unit to become unattached, which may result in  
injury or equipment damage. When the unit is dropped, please ask your  
dealer for advice. Do not continue using a damaged unit. Using a damaged  
unit may result in fire or electric shock. When reattaching the tilt stand,  
please use the same screws and tighten them securely.  
Do not touch a damaged LCD panel directly with bare hands.  
The liquid crystal that may leak from the panel is poisonous if it enters the  
eyes or mouth.  
If any part of the skin or body comes in direct contact with the panel,  
please wash thoroughly. If some physical symptoms result, please consult  
your doctor.  
Follow local regulation or laws for safe disposal.  
The backlight of the LCD panel contains mercury.  
Handle with care when carrying the unit.  
Disconnect the power cord and cables when moving the unit. Moving the  
unit with the cord attached is dangerous. It may result in injury.  
When handling the unit, grip the bottom of the unit firmly with both  
hands ensuring the panel faces outward before lifting.  
Dropping the unit may result in injury or equipment damage.  
Do not block the ventilation slots on the cabinet.  
* Do not place any objects on the ventilation slots.  
* Do not install the unit in a closed space.  
* Do not use the unit laid down or upside down.  
Blocking the ventilation slots prevents proper airflow and may result in  
fire, electric shock, or equipment damage.  
Do not touch the plug with wet hands.  
Doing so may result in electrical shock.  
Use an easily accessible power outlet.  
This will ensure that you can disconnect the power quickly in case of a  
problem.  
Periodically clean the area around the plug.  
Dust, water, or oil on the plug may result in fire.  
Unplug the unit before cleaning it.  
Cleaning the unit while it is plugged into a power outlet may result in  
electric shock.  
In order to suppress the luminosity change by long-term use and to  
maintain the stable luminosity, use of a monitor in lower brightness is  
recommended.  
The LCD panel is manufactured using high-precision technology.  
However, note that the appearance of any missing pixels or lit pixels does  
not indicate damage to the LCD monitor.  
Percentage of effective pixels:99.9994%or higher.  
The backlight of the LCD panel has a fixed life span. When the screen  
becomes dark or begins to flicker, please contact your dealer.  
Do not press on the panel or edge of the frame strongly, as this may result  
in damage to the screen. There will be prints left on the screen if the  
pressed image is dark or black. If pressure is repeatedly applied to the  
screen, it may deteriorate or damage your LCD panel. Leave the screen  
white to decrease the prints.  
Do not scratch or press on the panel with any sharp objects, such as a  
pencil or pen as this may result in damage to the panel. Do not attempt to  
brush with tissues as this may scratch the LCD panel.  
When the screen image is changed after displaying the same image for  
extended periods of time, an afterimage may appear. Use the screen saver  
or timer to avoid displaying the same image for extended periods of time.  
When the monitor is cold and brought into a room or the room temperature  
goes up quickly, dew condensation may occur inside and outside the  
monitor. In that case, do not turn the monitor on and wait until dew  
condensation disappears, otherwise it may cause some damages to it.