Zenith DVD Player DV8812 User Manual

DV380H-N.CUSALZK_0960_ENG 4/7/08 9:09 AM Page 1  
Installation and Operating Guide | Warranty  
Model Number | DVB812 | DVD Player  
For service/  
support Call:  
Toll Free Number  
1-877-9-ZENITH  
(http://www.zenithservice.com)  
© Copyright 2008, LG Electronics U.S.A., Inc.  
P/No. : MFL41090960  
 
DV380H-N.CUSALZK_0960_ENG 4/7/08 9:09 AM Page 3  
IMPORTANT SAFETY INSTRUCTIONS  
9. Do not defeat the safety purpose of the polarized or grounding-type  
plug. A polarized plug has two blades with one wider than the other. A  
grounding type plug has two blades and a third grounding prong. The  
wide blade or the third prong are provided for your safety. If the provid-  
ed plug does not fit into your outlet, consult an electrician for replace-  
ment of the obsolete outlet.  
CAUTION:  
PLEASE READ AND OBSERVE ALL WARNINGS AND  
INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE  
MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR  
FUTURE REFERENCE.  
This product has been designed and manufactured to assure personal safety.  
Improper use can result in electric shock or fire hazard. The safeguards incor-  
porated in this product will protect you if you observe the following procedures  
for installation, use, and servicing.  
10. Protect the power cord from being walked on or pinched particularly  
at plugs, convenience receptacles, and the point where they exit from  
the apparatus.  
This product does not contain any parts that can be repaired by the user.  
11. Only use attachments/accessories specified by the manufacturer.  
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO  
DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE  
PERSONNEL ONLY.  
12. Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with apparatus. When a cart is used, use cau-  
tion when moving the cart/product combination to avoid injury from  
tip-over.  
1. Read these instructions. - All these safety and operating instructions  
should be read before the product is operated.  
2. Keep these instructions. - The safety, operating and use instructions  
should be retained for future reference.  
3. Heed all warnings. - All warnings on the product and in the operating  
instructions should be adhered to.  
4. Follow all instructions. - All operating and use instructions should be fol-  
lowed.  
5. Do not use this apparatus near water. – For example: near a bath tub,  
wash bowl, kitchen sink, laundry tub, in a wet basement; or near a swim-  
ming pool; and other areas located near water.  
13. Unplug this apparatus during lightning storms or when unused for  
long periods of time.  
6. Clean only with dry cloth. – Unplug this product from the wall outlet before  
cleaning. Do not use liquid cleaners.  
14. Refer all servicing to qualified service personnel. Servicing is required  
when the product has been damaged in any way, such as power-sup-  
ply cord or plug is damaged, liquid has been spilled or objects have  
fallen into the apparatus, the product has been exposed to rain or  
moisture, does not operate normally, or has been dropped.  
7. Do not block any ventilation openings. Install in accordance with the manu-  
facturer’s instructions. - Slots and openings in the cabinet are provided for  
ventilation and to ensure reliable operation of the product and to protect it from  
over- heating. The openings should never be blocked by placing the product on  
a bed, sofa, rug or other similar surface. This product should not be placed in a  
built-in installation such as a bookcase or rack unless proper ventilation is pro-  
vided or the manufacturer’s instructions have been adhered to.  
8. Do not install near any heat sources such as radiators, heat registers,  
stoves, or other apparatus (including amplifiers) that produce heat.  
3
 
DV380H-N.CUSALZK_0960_ENG 4/7/08 9:09 AM Page 4  
About the  
Symbol Display  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Adjust the settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10  
Displaying Disc Information . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-12  
Listening to Music Disc or files . . . . . . . . . . . . . . . . . . . . . . . . .12  
Viewing photo files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
” may appear on your TV display during operation and indicates that the  
function explained in this owner’s manual is not available on that disc.  
Regional Codes  
This unit has a regional code printed on the rear of the unit. This unit can play  
only DVD discs labelled same as the rear of the unit or “ALL”.  
Most DVD discs have a globe with one or more numbers in it clearly visible  
on the cover. This number must match your unit’s regional code or the disc  
cannot play.  
If you try to play a DVD with a different regional code from your player, the  
message “Check Regional Code” appears on the TV screen.  
Copyrights  
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in  
public, or rent copyrighted material without permission. This product features  
the copy protection function developed by Macrovision. Copy protection signals  
are recorded on some discs. When recording and playing the pictures of these  
discs picture noise will appear. This product incorporates copyright protection  
technology that is protected by method claims of certain U.S. patents and other  
intellectual property rights owned by Macrovision Corporation and other rights  
owners. Use of this copyright protection technology must be authorized by  
Macrovision Corporation, and is intended for home and other limited viewing  
uses only unless otherwise authorized by Macrovision Corporation. Reverse  
engineering or disassembly is prohibited.  
Types of Playable Discs  
Logo  
Type  
DVD-VIDEO: Discs such as movies that can be  
purchased or rented.  
DVD-RW: VR mode, Video mode and finalized only  
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION  
SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE  
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525  
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT  
THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’  
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET  
COMPATIBILITY WITH THIS MODEL 525p UNIT, PLEASE CONTACT OUR  
CUSTOMER SERVICE CENTER.  
Audio CD: Music CDs or CD-R/CD-RW in music CD  
format that can be purchased.  
This unit plays DVD R/RW and CD-R/RW that contains audio titles, MP3, WMA  
and/or JPEG files. Some DVD RW/DVD R or CD-RW/CD-R cannot be played  
on this unit due to the recording quality or physical condition of the disc, or the  
characteristics of the recording device and authoring software.  
Manufactured under license from Dolby Laboratories. “Dolby”and the  
double-D symbol are trademarks of Dolby Laboratories.  
HDMI, the HDMI logo and High-Definition Multimedia Interface are trade-  
marks or registered trademarks of HDMI licensing LLC.  
4
 
DV380H-N.CUSALZK_0960_ENG 4/7/08 9:09 AM Page 5  
Hooking up the unit - more you can do  
Hooking up the unit  
S-Video connection  
A
Audio and Video Connection  
Connect the S-VIDEO OUTPUT jack on the unit to the corresponding input  
jacks on your TV using a S-Video cable.  
You will still need to connect the left and right audio cables to the TV, or  
digital audio cable to your stereo.  
The unit Audio/Video jacks are color coded (yellow for video, red for right audio  
and white for left audio). If your TV has only one input for audio (mono),  
connect it to the left (white) audio jack on the unit.  
B Component Video Connections  
Connect the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the  
unit to the corresponding input jacks on your TV using a YPbPr cable.  
You will still need to connect the left and right audio cables to the TV, or  
digital audio cable to your stereo.  
Resolution Setting  
You can change the resolution for component video output. Press  
RESOLUTION repeatedly to select the desired resolution - 480i,  
480p, 720p, 1080i, 1080p.  
For 720p and 1080p resolution on the component video output, only  
non-copy protected discs can be played back. If the disc is copy  
proteced,it will be displayed at the 480p resolution.  
Depending on your TV, some of the resolution settings may result in the  
picture disappearing or an abnormal picture appearing. In this case, press  
RESOLUTION repeatedly until the picture re-appears.  
C
Digital Audio Output Connection  
C
Connect one of the unit’s DIGITAL AUDIO OUTPUT (OPTICAL or COAXIAL)  
jacks to the corresponding jack on your amplifier.  
If the audio format of the digital output does not match the capabilities of  
your amplifier, the amplifier will produce a strong, distorted sound or no  
sound at all.  
To see the audio format of the current disc in the on-screen display, press  
AUDIO.  
This unit does not perform internal (2 channel) decoding of a DTS sound  
track. To enjoy DTS multi channel surround, you must connect this unit to  
a DTS compatible amplifier via one of this unit’s digital audio outputs  
Connect the AC  
power cord into the  
power outlet.  
A
B
C
5
 
DV380H-N.CUSALZK_0960_ENG 4/7/08 9:09 AM Page 6  
About HDMI  
Hooking up the unit  
HDMI (High Definition Multimedia Interface) supports both video and audio on a  
single digital connection for use with DVD Players, Set-Top Boxes, and other AV  
devices. HDMI was developed to provide the technologies of HDCP (High-band-  
width Digital Content Protection). HDCP is used to protect digital content  
transmitted and received.  
HDMI Connection  
Connect the HDMI OUTPUT jack on the unit to the HDMI input jack on an  
HDMI compatible TV using an HDMI cable.  
HDMI has the capability to support standard, enhanced or high-definition video  
plus standard to multi-channel surround-sound audio, HDMI features include  
uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one  
connector (instead of several cables and connectors), and communication  
between the AV source and AV devices such as DTVs.  
Notes on HDMI connection  
If your TV is not capable of handling 96 kHz sampling frequency, set the  
[Sampling Freq.] option to [48 kHz] on the setup menu (See page 9).  
If your TV is not equipped with Dolby Digital and MPEG decoder, set the  
[Dolby Digital and [MPEG] options to [PCM] on the setup menu (See page 9).  
Depending on your TV, some of the resolution settings may result in the pic-  
ture disappearing or an abnormal picture appearing. In this case, press  
RESOLUTION repeatedly unit the picture re-appears.  
Changing the resolution when the unit is connected with HDMI connector  
may result in malfunctions. To solve the problem, turn off the unit and then  
turn it on again.  
When you connect a HDMI or DVI compatible device make sure of the  
following:  
- Try switching off the HDMI/DVI device and this unit. Next, switch on the  
HDMI/DVI device and leave it for around 30 seconds, then switch on this  
unit.  
- The connected device’s video input is set correctly for this unit.  
- The connected device is compatible with 720X480i, 720X480p, 1280X720p,  
1920X1080i or 1920X1080p video input.  
- The 1080p, 720p and 480p resolutions are the progressive scan applied  
resolution  
Hooking up the unit - more you can do  
Resolution Setting  
You can change the resolution for HDMI output. Press RESOLUTION repeated-  
ly to select the desired resolution - 480i, 480p, 720p, 1080i, 1080p.  
Not all HDCP-compatible DVI devices will work with this unit.  
- The picture will not be displayed properly with non-HDCP device.  
Note for 1080p resolution  
The unit is able to provide a 1080p full HD image to most 1080p-capable TVs in  
the market today. However, there are some 1080p TVs available from certain  
companies that are limited in the types of 1080p images that can be accepted.  
Specifically, 1080p-capable TVs that don’t accept images in 60Hz can’t display  
an image from this unit.  
6
 
DV380H-N.CUSALZK_0960_ENG 4/7/08 9:09 AM Page 7  
Remote control  
REPEAT : Repeats a chapter, track, title or all.  
A-B : Repeats a section.  
RESOLUTION : Sets the output resolution for HDMI  
jack.  
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ a ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ  
POWER (1) : Switches the unit ON or OFF.  
OPEN/CLOSE (Z) : Opens and closes the disc tray.  
Numerical buttons : Selects numbered items in a  
menu.  
: Button is not available.  
CLEAR : Removes a track number on the Program  
List or a mark on the Marker Search menu.  
TV : TV control buttons.  
a
Controlling other TV’s with the remote control  
You can control the sound level, input source, and  
power switch of your LG TV with the supplied remote  
control. While holding down TV POWER button, press  
the number buttons to select the manufacturer code  
for your TV (see the table below). Release TV  
POWER button.  
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ b ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ  
SCAN (m / M) : Search backward or forward.  
SKIP (. / >) : Go to next or previous  
chapter/track.  
PAUSE/STEP (X) : Pauses playback  
temporarily/press repeatedly for frame-by-frame play-  
back.  
PLAY (N) : Starts playback.  
STOP (x) : Stops playback.  
Code numbers of controllable TVs  
b
c
If more than one code number is listed, try entering  
them one at a time until you find the one that works  
with your TV. Depending on your TV, some or all  
buttons may not function on the TV, after entering the  
correct manufacturer code.  
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ c ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ  
DVD MENU : Access the DVD menu.  
TITLE : Access the disc’s title menu, if available.  
vV b B : Navigates the menus.  
ENTER ( ) : Confirms menu selection.  
DISPLAY : Accesses On-Screen Display.  
RETURN (O) : Press to move backwards in the  
menu or exit the menu.  
Manufacturer  
LG/GoldStar  
Zenith  
Code Number  
1 (Default), 2  
1, 3, 4  
6, 7  
8, 9  
4
Samsung  
Sony  
Hitachi  
AUDIO (  
) : Selects an audio language or audio  
channel.  
Put the battery into the Remote Control  
Remove the battery cover on the rear of Remote  
Control, and insert battery (size AAA) with + and –  
matched correctly.  
SUBTITLE (  
) : Selects a subtitle language.  
d
ANGLE (  
able.  
) : Selects a DVD camera angle, if avail-  
SETUP : Accesses or exits the setup menu.  
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ d ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ  
MARKER : Marks any point during playback.  
SEARCH : Displays MARKER SEARCH menu.  
PROGRAM : Enters the program edit mode.  
ZOOM : Enlarges video image.  
7
 
DV380H-N.CUSALZK_0960_ENG 4/7/08 9:09 AM Page 8  
Main Unit  
a
b
c
d
e
f
a 1/I (Power)  
f N (Play)  
Starts playback.  
Turn the unit ON or OFF.  
x (Stop)  
Stops playback.  
b Disc Tray  
Insert a disc here.  
c Z (Open / Close)  
. (Skip)  
Returns to the beginning of current chapter or track or go to  
the previous chapter or track.  
Opens or closes the disc tray.  
> (Skip)  
d Display window  
Go to next chapter or track.  
Shows the current status of the unit.  
e Remote sensor  
Point the remote control here.  
8
 
DV380H-N.CUSALZK_0960_ENG 4/7/08 9:09 AM Page 9  
Adjust the display settings  
TV Aspect – Select which screen aspect to use based on the shape of your TV  
screen.  
Adjust the settings  
ON REMOTE  
[4:3]: Select when a standard 4:3 TV is connected.  
[16:9]: Select when a 16:9 wide TV is connected.  
1 Display setup menu:  
SETUP  
2 Select a desired option on the first level:  
3 Move to second level:  
v V  
B
Display Mode – If you selected 4:3, you’ll need to define how you would like  
widescreen programs and films to be displayed on your TV screen.  
[Letterbox]: This displays a widescreen picture with black bands at the top  
and bottom of the screen.  
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.  
4 Select a desired option on the second level: v V  
5 Move to third level:  
6 Change the setting:  
B
v V / ENTER  
Adjust the audio settings  
Dolby Digital / DTS / MPEG – Selects the type of digital audio signal when  
using the DIGITAL AUDIO OUTPUT jack.  
Adjust the settings - more you can do  
When you turn on for the first time  
The menu for a language selection will appear when you turn on the unit for the  
first time. You must select a language to use the unit. Use vV b B to select a  
language then press ENTER and the confirm menu will appear. Use b B to  
select [Enter] then press ENTER.  
[Bitstream]: Select this when you connect this unit’s DIGITAL AUDIO  
OUTPUT jack to an amplifier with a built-in Dolby Digital, DTS or MPEG  
decoder.  
[PCM] (for Dolby Digital / MPEG): Select this when you connect this unit’s  
DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in Dolby Digital  
or MPEG decoder.  
[Off] (for DTS): Select this when you connect this unit’s DIGITAL AUDIO  
OUTPUT jack to an amplifier without a built-in DTS decoder.  
Adjust the language settings  
Menu Language – Select a language for the Setup menu and on-screen  
display.  
Sample Freq. (Frequency) – Selects the sampling frequency of the audio  
signal.  
Disc Audio/Subtitle/Menu – Select a language for the Disc Audio/Subtitle/  
Menu.  
[48 KHz]: The audio signals are always converted to 48 kHz.  
[96 KHz]: The audio signals are output in their original format.  
[Original]: Refers to the original language in which the disc was recorded.  
[Other]: To select another language, press number buttons then ENTER to  
enter the corresponding 4-digit number according to the language code list.  
(see page 14) If you make a mistake while entering number, press CLEAR to  
delete numbers then correct it.  
DRC (Dynamic Range Control) – Make the sound clear when the volume is  
turned down (Dolby Digital only). Set to [On] for this effect.  
Vocal – Set to [On] only when a multi-channel karaoke DVD is playing. The  
karaoke channels on the disc mix into normal stereo sound.  
[Off] (for Disc Subtitle): Turn off Subtitle.  
9
 
DV380H-N.CUSALZK_0960_ENG 4/7/08 9:09 AM Page 10  
Adjust the lock settings  
Displaying Disc Information  
You must set the [Area Code] option to use the lock options. Select [Area Code]  
option then press B. Enter a 4-digit password then press ENTER. Enter it again  
then press ENTER to verify. If you make a mistake while entering number, press  
CLEAR then correct it.  
ON REMOTE  
1 Press DISPLAY:  
DISPLAY  
v V  
If you forget your password you can reset it. Display setup menu then input the  
6-digit number “210499”. The “P CLr” will appear in the display window and the  
password is deleted.  
2 Select a item:  
3 Adjust the Display menu settings:  
4 To return the exit:  
b B / ENTER  
DISPLAY  
Rating – Select a rating level. The lower the level, the stricter the rating. Select  
[Unlock] to deactivate the rating.  
Password – Sets or changes the password for lock settings.  
[New]: Enter a new 4-digit password using the numerical buttons then press  
ENTER. Enter the password again to confirm.  
Displaying Disc Information - more you can do  
You can select an item by pressing vV and change or select the setting by  
pressing b B.  
[Change]: Enter the new password twice after entering the current password.  
Area Code – Select a code for a geographic area as the playback rating level.  
This determines which area’s standards are used to rate DVDs controlled by the  
parental lock. (See page 14)  
Current title (or track) number/total number of titles (or tracks)  
Current chapter number/total number of chapters  
Elapsed playing time  
Adjust the others settings  
Selected audio language or channel  
B.L.E. (Black Level Expansion) – To select the black level of playback  
pictures. Set your preference and monitor’s ability.  
Selected subtitle  
Selected angle/total number of angles  
Symbol Used in this Manual  
ALL  
DVD  
ACD  
CD-G  
WMA  
All discs and file listed below  
DVD and finalized DVD R/RW  
MP3 files  
Audio CDs  
CD-G discs  
MP3  
WMA files  
MPEG4  
MPEG4 files  
10  
 
DV380H-N.CUSALZK_0960_ENG 4/7/08 9:09 AM Page 11  
ALL  
Pause a playback  
Playing a Disc  
Press PAUSE/STEP (X) to pause playback. Press PLAY (  
back.  
N
) to continue play-  
ON REMOTE  
DVD  
Frame-by-Frame playback  
1 Open the disc tray:  
2 Insert a Disc:  
Z
-
OPEN/CLOSE  
Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.  
ALL  
Playing repeatedly  
3 Close the disc tray:  
4 Start playback:  
Z
N
x
OPEN/CLOSE  
PLAY  
Press REPEAT repeatedly to select an item to be repeated. The current title,  
chapter or track will be played back repeatedly. To return to normal playback, press  
REPEAT repeatedly to select [Off].  
5 To stop playback:  
STOP  
Fast forward or fast reverse  
DVD  
ACD  
WMA  
MP3  
Playing a Disc - more you can do  
Press SCAN (m or M) to play fast forward or fast reverse during playback.  
You can change the various playback speed by pressing SCAN (m or M)  
Stops the playback  
The unit records the stopped point depending on the disc. “ Xx ” appears on the  
screen briefly. Press PLAY ( ) to resume playback (from the scene point). If you  
press STOP (x ) again or unload the disc (“ x ” appears on the screen), the unit will  
repeatedly. Press PLAY (  
N
) to continue play at normal speed.  
N
DVD ACD  
Repeating a specific portion (A-B)  
Press A-B at the beginning of the portion you wish to repeat and again at the end of  
the portion. Your selected portion will be repeated continually.  
To return to normal playback, press A-B to select [Off].  
clear the stopped point.  
=
=
(Xx Resume Stop, x Complete Stop) The resume point may be cleared when  
a button is pressed (for example :POWER, OPEN/CLOSE, etc).  
DVD  
Selecting a subtitle language  
DVD  
Playing a DVD that has a menu  
During playback, press SUBTITLE ( ) repeatedly to select a desired subtitle  
language.  
Most DVD’s now have menus which load first before the film begins to play. You can  
navigate these menus using vV b B or number button to highlight an option. Press  
ENTER to select.  
DVD  
Watching from a different angle  
If the angle indicator appears on the screen for a moment, you can select a  
Playing a DVD VR disc  
different camera angle by pressing ANGLE ( ) repeatedly.  
This unit will play DVD-RW disc that is recorded using the Video Recording (VR)  
format. When you insert a disc a DVD VR disc, the menu will appear on the  
DVD  
CD-G  
Hearing a different audio  
screen. Use vV to select a title then press PLAY (  
press DVD MENU or TITLE.  
N
). To display DVD-VR menu,  
During playback, press AUDIO ( ) repeatedly to switch between the available  
audio languages, channels or encoding methods.  
Some DVD-VR discs are made with CPRM data by DVD RECORDER. Player does  
not support these kinds of discs.  
DVD  
Slow down the playing speed  
While playback is paused, press SCAN (m or M) to slow down, reverse or  
forward playback. You can change the various playback speed by pressing  
ALL  
Skip to the next/previous chapter/track  
Press SKIP (>) to move to the next chapter/track.  
Press SKIP (.) to return to the beginning of the current chapter/track.  
Press SKIP (.) twice briefly to step back to the previous chapter/track.  
SCAN (m or M) repeatedly. Press PLAY (  
N
) to continue play at normal speed.  
11  
 
DV380H-N.CUSALZK_0960_ENG 4/7/08 9:09 AM Page 12  
DVD  
Watching a enlarged video image  
Listening to Music Disc or files  
During playback or pause mode, press ZOOM repeatedly to select zoom mode.  
You can move through the zoomed picture using vVb B buttons. Press  
CLEAR to exit.  
ON REMOTE  
1 Open the disc tray:  
2 Insert a disc:  
Z
-
OPEN/CLOSE  
DVD  
Viewing the title menu  
Press TITLE to display the disc's title menu, if available.  
3 Close the disc tray:  
4 Select a music from the menu:  
5 Start playback:  
Z
OPEN/CLOSE  
DVD  
Viewing the DVD menu  
v V, DVD MENU  
N PLAY  
Press DVD MENU to display the disc menu, if available.  
DVD  
x
6 To stop playback:  
STOP  
Marking a favourite scene  
You can mark positions by pressing MARKER at the desired position up to  
9 markers. Also you can recall or clear positions by pressing SEARCH.  
Use b or B to select a desired marker on the [MARKER SEARCH] menu, then  
press ENTER to recall it or CLEAR to clear it.  
Listening to Music Disc or files - more you  
can do  
Creating your own program  
You can play the contents of a disc in the order you want by arranging the order  
of the music titles on the disc. To add music on the program list, press  
DVD  
Starting play from selected time  
Searches for the starting point of entered time code. Press DISPLAY then  
select clock icon. Enter a time then press ENTER. For example, to find a scene  
at 1 hours, 10 minutes, and 20 seconds, enter "11020" and press ENTER. If  
you enter the wrong number, press CLEAR to enter again.  
E
PROGRAM to enter the program edit mode ( mark appears on the menu).  
Select a desired music on the [List] then press ENTER to add the music to the  
program list. Select music from the program list then press ENTER to start  
programed playback. To clear music from the program list, select the music you  
want to clear then press CLEAR in program edit mode. To clear all music from  
the program list, select [Clear All] then press ENTER in program edit mode. The  
program is cleared when the disc is removed or the unit is turned off.  
DVD  
ACD  
Last Scene Memory  
This unit memorizes last scene from the last disc that is viewed. The last scene  
remains in memory even if you remove the disc from the player or switch off the  
unit. If you load a disc that has the scene memorized, the scene is  
automatically recalled.  
Playing an CD-G disc  
Once you insert an CD-G disc, a menu appears on the screen. Use vV to  
select a track then press PLAY ( N). To display the CD-G menu during  
playback, press STOP (x ) twice.  
You can display the setup menu by pressing SETUP only when CD-G menu  
appears on the TV screen.  
Screen Saver  
The screen saver appears when you leave the unit in Stop mode for about five  
minutes. If the Screen Saver is displayed for five minutes, the unit automatically  
turns itself off.  
Displaying file information (ID3 TAG)  
While playing a MP3 file containing file information, you can display the  
information by pressing DISPLAY repeatedly.  
Mixed disc – MP3/WMA and JPEG  
When playing a disc containing MPEG4, MP3/WMA and JPEG files together,  
you can select which menu of files you would like to play by pressing TITLE.  
MP3/WMA music file requirement  
MP3/WMA compatibility with this unit is limited as follows:  
File extensions: “.mp3”, “.wma”  
Sampling frequency: within 8 - 48 kHz (MP3), within 22 - 48kHz (WMA)  
Bit rate: within 8 - 320kbps (MP3), within 32 - 256kbps (WMA)  
CD-R/RW, DVD R/RW Format: ISO 9660  
Maximum Files/Disc: Less than 650 (total number of files and folders)  
12  
 
DV380H-N.CUSALZK_0960_ENG 4/7/08 9:09 AM Page 13  
Viewing photo files  
ON REMOTE  
1 Open the disc tray:  
Z
OPEN/CLOSE  
2 Insert a disc:  
-
3 Close the disc tray:  
Z
OPEN/CLOSE  
4 Select a photo file on the menu:  
5 Display the selected file in full screen:  
6 To return to the menu:  
v V, DVD MENU  
N PLAY  
x
STOP  
Viewing photo files - more you can do  
Viewing photo files as a slide show  
Use vV b B to highlight ( ) icon then press ENTER to start slide show.  
You can change slide show speed using b B when ( ) icon is highlighted.  
Skip to the next/previous photo  
Press SKIP (. or >) to view the previous/next photo.  
Rotate a photo  
Use vV to rotate the photo in full screen counter clockwise or clockwise while  
viewing a photo in full screen.  
Pause a slide show  
Press PAUSE/STEP (X) to pause a slide show. Press PLAY ( N) to continue  
the slide show.  
Listening to music during slide show  
You can listen to music during slide show, if the disc contain music and photo  
files together. Use vV b B to highlight (  
slide show.  
) icon then press ENTER to start  
Watching a enlarged photo image  
While viewing a photo in full screen, press ZOOM repeatedly to select zoom  
mode. You can move through the zoomed photo using vVb B buttons.  
Press CLEAR to exit.  
Photo file requirement  
JPEG file compatibility with this unit is limited as follows:  
File extensions: “.jpg”  
Photo size: Less than 5M recommended  
CD-R/RW, DVD R/RW Format: ISO 9660  
Maximum Files/Disc: Less than 650 (total number of files and folders)  
13  
 
DV380H-N.CUSALZK_0960_ENG 4/7/08 9:09 AM Page 14  
Language Codes  
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.  
Language  
Afar  
Afrikaans  
Albanian  
Ameharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Bengali; Bangla  
Bhutani  
Bihari  
Breton  
Code  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
9072  
Language  
Croatian  
Czech  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Fiji  
Finnish  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Code  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
Language  
Hausa  
Hebrew  
Hindi  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Code  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Language  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maori  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian  
Oriya  
Code  
7678  
7684  
7775  
7771  
7783  
7776  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
Language  
Quechua  
Rhaeto-Romance 8277  
Rumanian  
Russian  
Samoan  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Shona  
Sindhi  
Singhalese  
Slovak  
Slovenian  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Code  
8185  
Language  
Tajik  
Tamil  
Telugu  
Thai  
Tonga  
Turkish  
Turkmen  
Twi  
Code  
8471  
8465  
8469  
8472  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
8373  
8375  
8376  
6983  
8385  
8387  
8386  
8476  
Italian  
Ukrainian  
Urdu  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
Korean  
Kurdish  
Laothian  
Latin  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Panjabi  
Pashto, Pushto  
Persian  
Polish  
Portuguese  
Bulgarian  
Burmese  
Byelorussian  
Chinese  
Latvian, Lettish  
Area Codes  
Choose a area code from this list.  
Area  
Code  
AF  
AR  
AU  
AT  
Area  
Costa Rica  
Croatia  
Czech Republic  
Denmark  
Ecuador  
Egypt  
El Salvador  
Ethiopia  
Fiji  
Finland  
France  
Germany  
Great Britain  
Greece  
Code  
Area  
Code  
Area  
Maldives  
Mexico  
Monaco  
Mongolia  
Morocco  
Nepal  
Netherlands  
Netherlands Antilles AN  
New Zealand  
Nigeria  
Norway  
Code  
Area  
Code  
Area  
Code  
LK  
Afghanistan  
Argentina  
Australia  
Austria  
Belgium  
Bhutan  
Bolivia  
CR  
HR  
CZ  
DK  
EC  
EG  
SV  
ET  
FJ  
Greenland  
Hong Kong  
Hungary  
India  
Indonesia  
Israel  
Italy  
Jamaica  
Japan  
Kenya  
Kuwait  
Libya  
Luxembourg  
Malaysia  
GL  
HK  
HU  
IN  
ID  
IL  
MV  
MX  
MC  
MN  
MA  
NP  
NL  
Paraguay  
Philippines  
Poland  
Portugal  
Romania  
Russian Federation RU  
Saudi Arabia  
Senegal  
Singapore  
Slovak Republic  
Slovenia  
South Africa  
South Korea  
Spain  
PY  
PH  
PL  
PT  
RO  
Sri Lanka  
Sweden  
Switzerland  
Taiwan  
Thailand  
Turkey  
SE  
CH  
TW  
TH  
TR  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
BE  
BT  
BO  
BR  
KH  
CA  
CL  
CN  
CO  
CG  
IT  
SA  
SN  
SG  
SK  
SI  
ZA  
KR  
ES  
Uganda  
Ukraine  
Brazil  
JM  
JP  
KE  
KW  
LY  
LU  
MY  
Cambodia  
Canada  
Chile  
China  
Colombia  
Congo  
NZ  
NG  
NO  
OM  
PK  
PA  
United States  
Uruguay  
Uzbekistan  
Vietnam  
Zimbabwe  
FI  
FR  
DE  
GB  
GR  
Oman  
Pakistan  
Panama  
14  
 
DV380H-N.CUSALZK_0960_ENG 4/7/08 9:09 AM Page 15  
Specifications  
Troubleshooting  
Cause  
General  
Symptom  
Correction  
No power.  
The power cord is disconnected.  
No disc is inserted.  
Plug the power cord into the wall  
outlet securely.  
Power requirements  
Power consumption  
Dimensions (Approx.)  
AC 120 V~60 Hz  
9W  
430 x 35 x 200 mm  
(W x H x D) without foot  
The power is on,  
but the unit does  
not work.  
Insert a disc.  
Net Weight (Approx.)  
Operating temperature  
Operating humidity  
Laser  
1.5 kg  
5 °C to 35 °C  
5 % to 90 %  
Semiconductor laser  
NTSC  
No picture.  
The TV is not set to receive the  
signal from the unit.  
Select the appropriate video input  
mode on the TV.  
Signal system  
The video cable is not connected  
securely.  
Connect the video cable securely.  
Outputs  
Video Output  
1.0 V (p-p), 75 , sync negative,  
RCA jack (L, R) x 1  
(Y) 1.0 V (p-p), 75 , sync negative,  
The equipment connected with  
the audio cable is not set to  
receive the signal from the unit.  
Select the correct input mode of  
the audio amplifier.  
No sound.  
Component Video Output  
RCA jack x 1  
(Pb)/(Pr) 0.7 V (p-p), 75 ,  
RCA jack x 2  
(Y) 1.0 V (p-p), 75 ,  
The AUDIO options are set to the Set the AUDIO settings to the  
wrong position.  
correct position.  
S-Video Output  
sync negative, Mini DIN 4-pinX1  
(C) 0.3 V, 75 Ω  
19 pin(HDMI standard, Type A)  
2.0 Vrms (1 KHz, 0 dB), 600 ,  
RCA jack (L, R) x 1  
An unplayable disc is inserted.  
Insert a playable disc. (Check the  
disc type and regional code.)  
The unit does not  
start playback.  
HDMI Video/Audio Output  
Audio Output  
The rating level is set.  
Change the rating level.  
Digital Output (Optical)  
Digital Output (Coaxial)  
3 V (p-p), Optical jack x 1  
0.5 V (p-p), 75 , RCA jack x 1  
The remote control is not pointed  
at the remote sensor on the unit.  
Point the remote control at the  
remote sensor of the unit.  
The remote con-  
trol does not work  
properly.  
Accessories  
The remote control is too far from Operate the remote control closer  
the unit. to the unit.  
Video/Audio cable, Remote Control, Battery  
Designs and specifications are subject to change without  
prior notice.  
15  
 
DV380H-N.CUSALZK_0960_ENG 4/7/08 9:09 AM Page 16  
Zenith Electronics, Inc. Limited Warranty - USA  
This Zenith Electronics product, will be repaired or replaced, at Zenith’s option, if it proves to be defective in material or workmanship, under normal use, during the  
warranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty is good  
only to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.  
WARRANTY PERIOD:  
HOW SERVICE IS HANDLED:  
LABOR: 90 days from the Date of Purchase.  
PARTS: One Year from the Date of Purchase.  
Call 1-877-9-ZENITH for instructions on getting the  
defective unit repaired or replaced.  
Please retain dated sales receipt and your box to return the unit to Zenith for  
repair or replacement.  
Shipping both ways will be paid by Zenith during the first 90 days of the Warranty  
Period. During the remainder of the Warranty Period (91~365 days), you pay  
inbound shipping charges and Zenith pays return shipping charges.  
*
Parts replaced are warranted for the remaining portion of the original warranty  
period.  
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MER-  
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN  
DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. ZENITH ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL,  
INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT  
LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CON-  
TRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an implied  
warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights that may  
vary from state to state.  
THIS LIMITED WARRANTY DOES NOT APPLY TO:  
Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration, maintenance or failure to  
maintain, or separate system components; and  
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside environmental specifications or  
contrary to the requirements or precautions in the Operating Guide, accident, lightning strikes or other natural causes, unauthorized  
modification or alteration, incorrect electrical current or voltage, signal reception or input, software not licensed directly by Zenith, soft-  
ware errors that do not disable functionality, operating and software protocols adopted after the date of manufacture or for outside the  
US, institutional or commercial use, or other causes not arising out of defect in material or workmanship.  
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.  
CUSTOMER INTER-ACTIVE CENTER NUMBERS:  
For Warranty Service, Where to buy, Product Assistance, or Customer  
Assistance  
Call 1-877-9-ZENITH (24 hours a day, 365 days per year) and select appropriate  
options from the menu.  
Or visit our website at http://www.zenithservice.com  
LG ELECTRONICS U.S.A., INC.  
1000 SYLVAN AVENUE  
ENGLEWOOD CLIFFS, NJ  
Printed in China  
Issue O  
16  
 

Weil McLain Boiler GOLD CGs User Manual
Whistler Home Security System WIC 2409C User Manual
Winegard Stereo System HD 9095P User Manual
Woods Equipment Brush Cutter BW126XHD User Manual
Woodstock Sander W1730 User Manual
Xantrex Technology Marine Battery 200 W User Manual
Xerox Printer M20 User Manual
Yamaha Outboard Motor 15A User Manual
Zanussi Fryer 200177 User Manual
Zanussi Oven ZOB550WL User Manual